Μάθημα - Σύνδεση οργάνου

From Audacity Development Manual
Revision as of 07:12, 4 August 2017 by Dimitris S (talk | contribs)
Jump to: navigation, search

FlagofUnitedKingdom.png Tutorial - Conectando un instrumento Anleitung - Ein Instrument anschließen

Μιλώντας γενικά, θα θέλετε να συνδέσετε αυτά τα όργανα στη θύρα εισόδου γραμμής του υπολογιστή σας, όχι στη θύρα μικροφώνου (που συχνά είναι μονοφωνική). Δεν έχουν όλοι οι υπολογιστές θύρα εισόδου γραμμής.
  • Μερικοί φορητοί υπολογιστές μπορεί να έχουν διακόπτη υλικού ή λογισμικού για να μετατρέπουν τη θύρα μικροφώνου σε στερεοφωνική στάθμη γραμμής.
  • Μερικοί μικροί φορητοί υπολογιστές (notebooks/netbooks) μπορεί να έχουν μια συμβατή θύρα εισόδου μικροφώνου που επιτρέπει εισόδους στάθμης γραμμής και μπορεί να παρέχει στερεοφωνική είσοδο.

Δοκιμάστε πάντα πρώτα την είσοδο στάθμης γραμμής και χρησιμοποιήστε μόνο μια είσοδο μικροφώνου, εάν δεν μπορείτε αλλιώς να πάρετε επαρκή ένταση ηχογράφησης. Μπορείτε να αγοράσετε σε οικονομικές τιμές αξιοπρεπείς διεπαφές ποιότητας USB με στερεοφωνική είσοδο στάθμης γραμμής, εάν χρειάζεται.

Σύνδεση συνθεσάιζερ (αρμόνιου, keyboard) στον υπολογιστή σας

Εάν το συνθεσάιζερ έχει υποδοχές RCA στο πίσω μέρος, τότε ο καλύτερος τρόπος σύνδεσης του είναι με διπλό RCA σε στερεοφωνικό καλώδιο μικρού βύσματος όπως φαίνεται παρακάτω, που συνδέεται από υποδοχές εξόδου RCA στο πίσω μέρος του συνθεσάιζερ στη θύρα εισόδου γραμμής του υπολογιστή.

StereoMini-RCA.jpg
Στερεοφωνικό μικρό βύσμα σε διπλό καλώδιο RCA

Εάν το συνθεσάιζερ έχει δύο υποδοχές 1/4 ίντσας στο πίσω μέρος, θα χρειαστείτε υποδοχή 2 x 1/4 ίντσας σε στερεοφωνική υποδοχή 3,5mm, ή μπορείτε να χρησιμοποιήσετε διπλό RCA σε στερεοφωνικό καλώδιο μικρού βύσματος και δύο RCA σε προσαρμογείς 1/4 ίντσας. Συνδέστε τα βύσματα RCA στις υποδοχές RCA στους προσαρμογείς - τώρα έχετε ένα διπλό καλώδιο 1/4 ίντσας σε στερεοφωνικό μικρό βύσμα.

Jack-to-stereo-mini-jack.jpg RCA quarterinch adapter.jpg
Υποδοχή 1/4 ίντσας σε στερεοφωνική υποδοχή 3,5mm Προσαρμογέας RCA σε 1/4 ίντσας


Εάν το συνθεσάιζερ δεν έχει καμιά από αυτές τις επιλογές, αλλά έχει στερεοφωνική υποδοχή ακουστικών 1/4 ίντσας ή 3,5mm, ο πιο απλός τρόπος σύνδεσης του είναι με καλώδιο στερεοφωνικού μικρού βύσματος στο ένα άκρο (για τον υπολογιστή) και στερεοφωνικής υποδοχής κατάλληλου μεγέθους στο άλλο άκρο για την υποδοχή ακουστικών συνθεσάιζερ. Συνδέστε την έξοδο ακουστικών του συνθεσάιζερ στη θύρα εισόδου γραμμής του υπολογιστή. Θα χάσετε τη δυνατότητα απευθείας ακρόασης του συνθεσάιζερ με τα ακουστικά, και οποιαδήποτε εσωτερικά ηχεία προφανώς θα σιγάσουν. Μπορείτε να το αποφύγετε χρησιμοποιώντας καλώδιο διαχωριστή ακουστικών, ή ενεργοποιώντας το Πλήρης αναπαραγωγή λογισμικού στο Audacity, (Το Πλήρης αναπαραγωγή λογισμικού θα εισάγει καθυστέρηση μεταξύ του χρόνου που παίζετε μια νότα και του χρόνου που την ακούτε). Αυτό το θέμα καλύπτεται πιο λεπτομερώς στην επόμενη ενότητα.

Connecting a guitar to your computer

This section is about connecting an electric guitar, bass guitar or acoustic guitar with electrical pickup to your computer. If you want to record an acoustic guitar with a microphone, or record the sound of your guitar amplifier using a microphone, please read the section on connecting a microphone to your computer.
If you have a "USB Guitar" then you can skip ahead to testing the input connection for your operating system.

Generally the output level from an electric guitar (or electrical pickup in an acoustic guitar) is sufficient to drive the line input port on a computer. Turn the volume control on the guitar all the way up. You will need a shielded adapter cable that goes from a 1/4 inch mono plug (to plug into the guitar) to a mono mini-plug (to plug into the computer line input port).

You probably have a guitar cable for plugging the guitar into an amplifier, and you may be tempted to buy a 1/4 inch to 1/8 inch adapter instead, plug it into the computer line input then connect the guitar to the adapter using the cable - do not do this! This creates a heavy, stiff cable hanging off the back of your computer - the slightest tug in the wrong direction could damage your soundcard!

If you cannot get a good recording level when connecting to the line input port (explained in a following section on setting recording levels in Audacity), you can try the microphone input on your computer (if you have one). Beware of overloading the microphone input. You can turn down the volume control on your guitar to compensate for the extra amplification in the microphone input port, but hum and noise may increase in comparison to using the line input port.

Most effect pedals are designed to deliver about the same volume to the amplifier as the unaffected guitar sound (the volume you get when the effect is bypassed). Thus you can connect your guitar to a pedal and then connect the pedal to the computer.

Some guitar amplifiers include a "direct output" for feeding the amplifier sound to recording or PA systems. Amplifiers designed for stage use that include this feature will usually have either a line-level 1/4 inch mono jack output, or a microphone-level balanced output using an XLR connector. Connecting this output to your computer microphone input is beyond the scope of this Tutorial - talk to the folks at your local music store.

Alert Some amplifiers have a 1/4 inch output for connecting an external speaker. This must not be connected directly to the computer soundcard input as the signal level is far too high and may permanently damage the soundcard.

Some USB audio interfaces are specifically designed for connecting a guitar to a computer or may have a dedicated input for electric guitar or bass guitar. Talk to the folks at your local music store.

Links

<  Back to: Tutorial - Connecting Up

|< Tutorial - Your First Recording